Aluminum Die Casting Processing

CZC Industrial provides aluminum die casting processing. Aluminum die-casting products are mainly used in electronics, automobiles, motors, home appliances and some communication industries. Some high-quality aluminum products with high performance, high precision and high toughness are also used in industries with relatively high requirements such as large aircraft and ships.

Aluminum Die Casting Processing:

● Mold closing: the mold is closed and waiting for pouring.
● Filling: the manipulator or operator pours the material into the furnace from the furnace
● Injection: Carry out injection according to the set process parameters
● Mold opening: the mold is opened, and the core is pulled with an inclined guide column, and the core is pulled synchronously
● Core pulling: Under the action of the core pulling device, the mold exits from the side to facilitate ejection. If it is a front (fixed) mold core pulling, it is necessary to pull the core first and then open the mold.
● Top piece: Under the action of the push-out mechanism, the casting is ejected for easy removal
● Pick-up: Remove the casting from the mold manually or automatically. If there is a pin, pay attention to the direction and angle, and do not knock or pull it brutally, otherwise the ejector pin will be easily damaged.
● Spraying: Clean up the mold cavity, spray the release agent evenly on the front and rear molds.
● First reset mechanism: If there is a thimble under the core puller, it is necessary to make a first reset mechanism such as a pull rod to protect the mold.
● Close the mold again and repeat the above process